Enhanced Packaging for Prefinished Doors!
The ultimate goal for the BWI Fine Finish Gen II Packaging is to make it easy for your receivers to un-package, inspect, and quickly re-package the doors.
You can do this in 5 easy steps —
Step 1:
Carefully cut the clear plastic shrink wrap along the jamb side and remove it. This will allow easy access to the unit.
Step 2:
Open the front access panel, by removing the male tabs from the female slots.
Step 3:
To open, swing each access panel to the left and right to allow clear vision to the front of the unit. Once inspected, close the panel by inserting the tabs into the slots.
Step 4:
Repeat step 4 on the back side of the unit.
Step 5:
Lift Foam and inspect hinge side of door. Once hinge side is inspected, close the panel by inserting the tabs into the slots.
*Please re-wrap the door with clear plastic shrink wrap.
**Make sure you sign both the delivery ticket, and the prefinished driver inspection form and give driver copy.